- 161 -When [Wi-Fi] is selected1 Turn on the Wi-Fi function in the smartphone’s setup menu.2 On the smartphone’s Wi-Fi setting screen, select the SSID displayed on thisunit.≥ If this is the first time the smartphone is connecting to this unit via Wi-Fi, enter the Passworddisplayed on this unit’s screen into the smartphone.≥ It may take time to complete the Wi-Fi connection.3 When the Wi-Fi connection is complete, press the home button on thesmartphone and start up the smartphone application “Image App”.4 Follow the on-screen instructions of the smartphone to set up a connection.≥ When the settings is complete, the smartphone and this unit are connected directly, allowing youto use remote operations.Control this unit remotely with the smartphone. (l 135)Connecting to a wireless access pointCheck if the wireless access point you are using is compatible with WPSj If the wireless access point is compatible with WPS:Proceed to the following [WPS Connection]j If the wireless access point is not compatible with WPS:“Searching for wireless access points to set up a connection” (l 162)1 Press Wi-Fi button on this unit.2 Touch [Wi-Fi Setup].3 Touch [Wireless Settings].4 Touch the part with no display of a wirelessaccess point C.≥ For information on how to delete wireless access points orchange the search order of wireless access points, pleaserefer to [Wireless Settings] on page 170.5 Touch [WPS Connection].6 Set the wireless access point to waiting for WPS.≥ For further details, please read the operating instructions for thewireless access point. (When using a tethering connection, pleaseread the operating instructions for the smartphone.)≥ A message is displayed when the connection is complete. Touch[ENTER], and exit [Wireless Settings].≥ A message is displayed when the connection attempt fails. Touch[ENTER], and set the connection again.[WPS Connection]A [Delete]B [ENTER]
