- 167 -Connecting from the historyEach use of a Wi-Fi function is stored in the Wi-Fi connection history. Connecting from the historyallows you to easily set up a connection using the previous connection settings.1 Press Wi-Fi button on this unit and touch [History].2 Touch the desired item to be connected.≥ The history of Wi-Fi functions and connection destinations that have been used is displayed as alist.≥ For periods when a smartphone, etc. and this unit were connected directly, only the list of Wi-Fifunctions is displayed.Each item stores its [Direct Connection Password] setting (l 171). Connections without apassword are displayed with [No Password] on the history list.≥ To display the connection details, touch [DETAIL].3 Touch [ENTER].≥ When the connection is complete, a message will be displayed and the screen will switch to theWi-Fi function screen selected in step 2. Perform the operation of the selected Wi-Fi function.≥ If you have selected [Link to Cell], start up the smartphone application “Image App” after checkingthat “Under smartphone control.” is displayed on the LCD monitor.If the connection cannot be established, check the Wi-Fi setup of the smartphone.≥ The history can store up to 8 most-recently used Wi-Fi connections.≥ In the following cases, the Wi-Fi connection will not be stored in the history:j If you set up a Wi-Fi connection from [Wireless Settings] in [Wi-Fi Setup]j If you set up a Wi-Fi connection for the Wireless Multi-Camera function (l 184)Confirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj The following icons are displayed on the screen:When connected to wireless access point:When directly connected: