- 134 -≥ Proceed to Step 5 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-FiSetup] (l 165).1 Press Wi-Fi button on this unit and touch [Link to Cell].≥ (If you have touched [Link to Cell] for the first time)A message will be displayed asking whether to connect to a wireless access point. Touch [NO].≥ If a wireless access point is already registered in [Wireless Settings] in [Wi-Fi Setup], priority willbe given to a connection using the wireless access point. A connection using the wireless accesspoint will be established for remote operations.2 Touch [Wi-Fi].≥ It will go into connection standby for remote operation.3 Turn on the Wi-Fi function in the smartphone’s setup menu.4 On the smartphone’s Wi-Fi setting screen, select the SSID displayed on thisunit.≥ If this is the first time the smartphone is connecting to this unit via Wi-Fi, enter the Passworddisplayed on this unit’s screen into the smartphone.≥ It may take time to complete the Wi-Fi connection.5 When the Wi-Fi connection is complete, press the home button on thesmartphone and start up the smartphone application “Image App”.≥ When the connection to this unit is complete, the image from this unit is displayed on thesmartphone screen. Control this unit remotely with the smartphone.Touch [EXIT] or press Wi-Fi button.≥ The message is displayed. Touch [YES] to close the indication.≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten,smartphone information with the oldest registration date and time will be deleted.j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone directly.Using [Link to Cell] with a wireless access point connection≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-FiSetup] (l 161 to 164).1 Press Wi-Fi button on this unit.2 Touch [Link to Cell] on the Wi-Fi menu screen.≥ It will go into connection standby for remote operation.3 Connect the smartphone to a wireless access point.4 Start up the smartphone application “Image App”.≥ When the connection to this unit is complete, the image from this unit is displayed on thesmartphone screen.Control this unit remotely with the smartphone.When [Direct Connection Password] is set to [ON]To exit [Link to Cell]
