- 163 -6 Touch the wireless access point to connect.≥ If you touch [Refresh], you can search for wireless access points again.≥ If you touch and select a wireless access point, all characters will be displayed. In thiscase, touch [ENTER].≥ When no wireless access points are displayed, refer to “Setting up a connection manually”.(l 163)≥ If an Encryption key (Password) is not set, the connection is complete and a message isdisplayed. Touch [ENTER], and exit [Wireless Settings].7 (When there is an Encryption key (Password))Enter the Password.≥ For details on how to enter characters, refer to page 95.≥ When the entry is complete, touch [Enter].≥ A message is displayed when the connection is complete. Touch [ENTER], and exit [WirelessSettings].≥ When connecting by [Manual Setting], confirm the SSID (Identification name), Authenticationmethod, Encryption type, and Encryption key (Password) of the wireless access point you areusing.1 Press Wi-Fi button on this unit.2 Touch [Wi-Fi Setup].3 Touch [Wireless Settings].4 Touch the part with no display of a wirelessaccess point C.≥ For information on how to delete wireless access points orchange the search order of wireless access points, pleaserefer to [Wireless Settings] on page 170.5 Touch [Manual Setting].6 Touch [INPUT], then enter the SSID of thewireless access point to connect.≥ For details on how to enter characters, refer to page 95.≥ When the entry is complete, touch [Enter].Confirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screenSetting up a connection manuallyA [Delete]B [ENTER]
