- 158 -Preparations before using [Link to Cell]Install the smartphone application “Image App” on your smartphone. (l 183)Operate this unit and the smartphone to set up a direct connection.Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (l 195)≥ The default setting for [Direct Connection Password] is [OFF].Select [ON] as needed, for example when the setting seems necessary for your Wi-Fienvironment.≥ When [Direct Connection Password] is set to [OFF]j Proceed to “When [Direct Connection Password] is set to [OFF]” in “Using [Link to Cell] with adirect connection”. (l 159)≥ When [Direct Connection Password] is set to [ON][HC-WXF991PP]/[HC-VX981PP]:Enter SSID and Password or scan QR code to connect.j [WPS Connection] (l 189)j Connecting with QR code (l 190)j Connecting by entering an SSID and Password (l 191)When the Wi-Fi connection is complete, proceed to “When [Direct Connection Password] is set to[ON]” in “Using [Link to Cell] with a direct connection”. (l 160)1 Check if the wireless access point is compatible with IEEE802.11b/g/n.2 Set up a Wi-Fi connection between this unit and the wireless access point.≥ [WPS Connection] (l 186)≥ Searching for wireless access points to set up a connection (l 187)≥ Setting up a connection manually (l 188)3 When the Wi-Fi connection is complete, follow the procedure in “Using [Linkto Cell] with a wireless access point connection”. (l 160)≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with thesmartphone application “Image App”. (l 185)Setting up a direct Wi-Fi connection between this unit and asmartphoneSetting up a Wi-Fi connection via a wireless access point