- 16 -The unit can record still pictures or motion pictures to an SD card. To record to an SD card, read thefollowing.Cards that you can use with this unitBattery capacity indication≥ The display changes as the battery capacity reduces. # # # #If there is less than 3 minutes remaining, then will become red. If the batterydischarges, then will flash.≥ Screen display will disappear when no touch operation is performed for a specific period oftime. However, it will be constantly displayed when the remaining battery time becomes lessthan 30 minutes.≥ The remaining battery capacity is displayed when using the Panasonic battery that you canuse for this unit. The actual time can vary depending on your actual use.≥ When using the AC adaptor or batteries made by other companies, the remaining batterycapacity will not be shown.PreparationRecording to a cardCard type CapacitySD Memory Card 512 MB to 2 GBSDHC Memory Card 4 GB to 32 GBSDXC Memory Card 48 GB to 128 GB≥ Please check the latest information on the support website below.http://panasonic.jp/support/global/cs/e_cam(This website is in English only.)≥ When using an SDHC Memory Card/SDXC Memory Card with other equipment, check theequipment is compatible with these Memory Cards.≥ An Eye-Fi X2 series SD card is required to use functions related to Eye-Fi. (l 152)≥ We do not guarantee the operation of SD cards other than the ones above. Further, SD cardswith a capacity of less than 32 MB cannot be used for motion picture recording.≥ Operation is not guaranteed for all SD cards.≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cardsthat do not have the SDXC logo are not based on SD Memory Card Specifications.≥ When the write-protect switch A on SD card is locked, no recording,deletion or editing will be possible on the card.≥ Keep the Memory Card out of reach of children to prevent swallowing. 32