- 102 -1 Connect the unit to the Blu-ray disc recorder or high-definition(AVCHD) compatible DVD recorder.≥ The USB function selection screen will appear on the screen of the unit.2 Touch [RECORDER] on the screen of this unit.≥ When you select an option other than [RECORDER], reconnect the USB cable.3 Touch the media you wish to dub.≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screento turn the LCD monitor on.4 Dubbing through operations on the Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder.≥ Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteedwith any other USB cables.)≥ For details on dubbing and playback methods, read the operating instructions of theBlu-ray disc recorder or DVD recorder.≥ If the dubbed 3D video does not display in 3D, make the necessary settings on the TV. (Forfurther details, refer to the operating instructions of your TV)≥ When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen mayappear on the television connected to the Blu-ray disc recorder. In this case as well,perform the operations of Steps 1 to 4.≥ If the battery runs down during dubbing, a message will appear. Operate the Blu-ray discrecorder or DVD recorder to cancell the dubbing.About the screen indication of the unit≥ When the unit is accessing the SD card, card access icon ( ) appears on the unitscreen and the access lamp is on.≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit isaccessing the media, as this may result in the loss of recorded content.
