Panasonic HDC-Z10000 Operating Instructions Manual

Also see for HDC-Z10000: Basic operating instructions

Contents

- 119 -Display relating to lens can be switched. (Zoom Display, Optical Image Stabilizer, FocusDisplay, White Balance, Iris, Gain, Auto Iris, Shutter Speed, 3D Macro)Display can be switched between the remaining recordable time of the SD card and theremaining battery capacity indication.Display which remains displayed even when [USER BUTTON DISPLAY], [GUIDE LINES],[SAFETY ZONE], [DATE/TIME], [LEVEL METER], [CONVERGENCE], [LENS STATUS] and[CARD&BATTERY] are set to [OFF] can be switched.Detected faces appear with frames.≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screentake preference over others.∫ Prioritised face framingPrioritised face framing is displayed as orange frames. Focus and adjustment of brightnesswill be performed against the prioritised face framing.≥ Prioritised face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.≥ The white frame is for face detection only.≥ It cannot be set while in the Interval Recording is used.≥ In 3D Recording Mode, prioritised face framing is not displayed in following cases:j 3D display is set to 3D display or MIX display (l 65)j It is set to R-Image (l 65)j During 3D display on a connected TV (l 85)[LENS STATUS][ON]/[OFF][CARD&BATTERY][ON]/[OFF][OTHER DISPLAY][ON]/[OFF][FACE FRAMING][OFF]:Cancell the setting.[PRIMARY]:Only the prioritised face framing is displayed.[ALL]:All face detection framings are displayed.