- 44 -Perform focus adjustments using the focus ring. If auto focusing is difficult due to theconditions, then use Manual Focus.≥ Switch to Manual Mode. (l 39)1 Press the FOCUS A/M/¶ button to switch to Manual Focus.≥ It will switch to MF from AF.2 Adjust the focus by rotating the focus ring.≥ The focus value can be set from MF00 (focus distance: approximately 30 cm (in 3DRecording Mode) and approximately 3.5 cm (in 2D Recording Mode)) to MF99 (focusdistance: infinity). The larger the focus value gets, the further the position where focus isachieved.≥ It is set to MF95 and the focus will move to infinite when the FOCUS A/M/¶ button ispressed and held.≥ To return to Auto Focus, either press the FOCUS A/M/¶ button or set to Intelligent AutoMode by switching the iA/MANU switch.≥ When the distance to the subject approaches within 1 m approx., the unit switches to themacro range and or . (The unit may switch to the macro range even when thedistance to the subject is 1 m or more depending on the subject.)≥ Depending on the zoom magnification, this unit may fail to switch to the macro range, or goto a non-displayed focus value.≥ When you perform a zoom operation in the macro range, this unit may go out of focus.≥ When you change the [3D/2D REC MODE] setting, this unit will go into Auto Focus Mode.Utilising the USER buttonIt is convenient to use following functions of the USER button when it is set to Manual Focus.≥ Please refer to page 60 for details about setting the USER button.RecordingFocusUSER button function EffectPush AF (l 62) It can be temporary changed to Auto Focus when it isset to Manual Focus.Focus Assist (l 64) The in-focus area is displayed in red.FOCUS A/MA FOCUS A/M/¶ buttonB Focus ring
