Remote Control PanelMacintoshBasics WindowsWindows 42■ OthersPower save modeTo conserve energy and operating cost, this printer is provided with a programmablepower save feature. The printer is factory set with the power save feature turned on tocomply with ENERGY STAR® requirement. The printer enters the Power Save mode whenthe printer is idle for 5 minutes by default.Auto continuesWith this feature turned on, the printer automatically continues the current print job in thecase of certain non-fatal errors.Page ProtectionWith this feature turned on, the printer does not begin printing until the processor hasfinished imaging the entire page. The page then prints correctly, although it takes slightlylonger to print.I/O timeout settingAutomatically prints the remaining data in memory when the computer does not senddata to the printer during the set time.Printer EmulationSelects PCL or PostScript to print data.• Auto: PCL or PostScript is Automatically selected depending on the print data.• PCL: PCL is selected for printing.NOTE• If the PostScript emulation is not used, select PCL for the Printer Emulation. It willbecome difficult that the memory overflow error occurs.LanguageSelects the language when printing the configuration page [see “Tool Menus (Tool BarIcons)” on page 32].
