Panasonic KW2M-A User Manual

Also see for AKW263100A: User manual

Contents

◆Parameters for pulse input ○: Available －: Not availableItem Range Initial value SettingKeys WebPulse input 30, 2000 30－ ○Pre-scale 0.001 to 100.000 1.000Unit forpulse output(OUT1,OUT2)kWh 0.001, 0.01, 0.1, 1, 10, 100(kWh/1pulse)0.001alarmStand-by power, Active power,Reactive power, Apparent power,Over current, Under current,Power interruption, Power factor,Over voltage, Under voltage,Over frequency, Under frequency,Current THD, Voltage THD,Current harmonics,Voltage harmonics,Current unbalancing,Voltage unbalancing,Power demand, Current demandGeneral-purpose General outputTarget phase for pulse output(OUT1,OUT2) Total, Phase1, Phase2, Phase3 totalTarget phasefor alarmoutput(OUT1,OUT2)electric power Total, All, Phase1, Phase2, Phase3 totalcurrent All, Phase1, Phase2, Phase3,Phase N AllPowerinterruptionOver voltageUnder voltageAll, Phase1, Phase2, Phase3,Line 1-2, Line 2-3, Line 3-1 AllIntegral direction (OUT1,OUT2) P, -P POutput pulse width 1 to 100 [ms] 1Stand-by alarm (threshold)(OUT1,OUT2) 0.1 to 100.0 [%] 100.0Stand-by alarm (start time)(OUT1,OUT2) 0 to 9999 [sec.] 0Stand-by alarm (phase)(OUT1,OUT2) Phase1, Phase2, Phase3, All AllPower alarm(active/reactive/apparent)threshold (ON/OFF)(OUT1,OUT2)0.00 to999999999.999 [kW/kvar/kVA] 999999999.999PF alarm threshold (ON/OFF)(OUT1,OUT2) 0.000 to 1.000 0.000Over frequency alarmthreshold (ON/OFF)(OUT1,OUT2) 0.00 to 100.00 [Hz]100.00Under frequency alarmthreshold (ON/OFF)(OUT1,OUT2)0.00Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com