5.4 Demand functionYou can select demand calculation methods for KW2M-A Eco-POWER METER from the bellows.・According to IEC61557-121. Sliding block interval demand2. Fixed block interval demand3. Current demandPlease use this simple demand function as your standard. The value is not guaranteed.CautionDefinition of DemandIt is demand measurement in order to use by yourself as your standard.5.4.1 Block interval demandIt calculates demand by setting interval and displays.You can select sliding block or fixed block for interval.It output demand alarm according to the setting conditions.Sliding blockSet power interval by 1 to 60(min.) (every 1-min.). It calculates demand during latest finished intervaland displays.One interval is started every time that set for ‘power demand interval 2’.Ex.) Power demand interval: 15 min. Power demand interval 2: 1 min.15 min. intervalCalculate demand during4 to 19 min0 1 2 3 4 ・・・ ・・・ 15 16 17 18 19 [min.]Fixed blockSet power interval by 1 to 60 (min.) (every 1-min.) It calculates demand during latest finished intervaland displays. After one interval finishes, the next interval starts.Calculate demandduring 0 to 15 min.Calculate demandduring 15 to 30 min.15-min. interval 15-min. interval0 15 30 [min.]Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
