Panasonic KX-FP362BX Service Manual

Code Function Set Value Default RemoteSetting570 Break % select 1:61% / 2:67% 61% OK571 ITS auto redial time set 00~99 05 OK572 ITS auto redial line disconnection time set 001~999sec 065sec OK573 Remote turn-on ring number 01~99 10 OK580 TAM continuous tone detection 1:ON / 2:OFF ON OK590 FAX auto redial time set 00~99 05 OK591 FAX auto redial line disconnection time set 001~999sec 065sec OK592 CNG transmit select 1:OFF / 2:ALL / 3:AUTO ALL OK593 Time between CED and 300 bps 1:75ms / 2:500ms / 3:1sec 75ms OK594 Overseas DIS detection 1:1st / 2:2nd 1st OK595 Receive error limit value 001~999 100 OK596 Transmit level set -15~00dBm -10dBm OK598 Receiving Sensitivity 20~48 40 OK599 ECM frame size 1: 256 byte / 2: 64 byte 256 byte OK717 Transmit speed select 1:14400 / 2:12000 / 3:9600/ 4:7200/5:4800/ 6:240014400bps OK718 Receive speed select 1:14400 / 2:12000 / 3:9600/ 4:7200/5:4800/ 6:240014400bps OK722 Redial tone detect 1:ON / 2:OFF ON OK731 CPC mode 1:A / 2:B / 3:OFF A OK732 Auto disconnect 1:350ms / 2:1800ms / 3:OFF 350msec OK745 Power on film feed 1:ON / 2:OFF ON OK763 CNG detect time for friendly reception 1:10s / 2:20s / 3:30s 30s OK771 T1 timer 1:35s / 2:60s 35s OK774 T4 timer 00~99 × 100ms 00ms OK775 Monitoring of message transfer 1:ON / 2:OFF OFF OK784 Voice prompt 1:Start --------- NG815 Sensor & VOX test --------- --------- NG844 Original setting 1:Normal / 2:Light / 3:Darker Normal NG852 Print test pattern --------- --------- NG853 Top margin 1~9 5 OK874 DTMF ON time 060~200ms 090ms OK875 DTMF OFF time 060~200ms 085ms OK880 History list 1:Start --------- NG881 Journal 2 --------- --------- NG882 Journal 3 --------- --------- NG991 Setup list 1:Start --------- OK994 Journal list 1:Start --------- OK995 Journal 2 list 1:Start --------- OK996 Journal 3 list 1:Start --------- OK998 History list 1:Start --------- OK999 Service list 1:Start --------- OKOK means "can set".NG means "can not set".Note:Refer to SERVICE FUNCTION TABLE (P.48) for descriptions of the individual codes.Example:If you want to set value in the "004 Transmission report mode", press the dial key number 1,2 or 3 corresponding to the SetValue you want to select. (1:ERROR/2:ON/3:OFF)55KX-FP362BX