Panasonic KX-FP362BX Service Manual

(Cause and Countermeasure)As shown in the chart above, the total handshaking time must be reduced, but because of the long distance connection andlinking of several stations, the line connection time cannot be reduced. Accordingly, the following countermeasures should betried.(A)... As the 35 sec. count is started directly after dialing or directly after the START button has been pressed for models witha START button, the other party should be called manually, if possible. Another possibility is entering two pauses at the end ofthe auto dial number on the transmission side. Then the count start time can be delayed for 2 pauses (about 10 sec.).Cause 2:Erroneous detection because of an echo or an echo canceler.(Echo/Echo Canceler)The signal from FAX1 reaches FAX2 via stations 1 and 2, but the reflection signal at station 2 also returns via station 1 (echo).As the distance between station 1 and station 2 is far, the echo returns to FAX 1 at a max of 600 msec after transmission. Thereis a possibility that this signal is detected erroneously as the signal from FAX2. For a normal call, there is also a possibility thatthe echo of their own voice will make the call difficult to understand. For this reason, each station (station 1 and station 2)attaches echo cancelers (S1 and S2) for international lines or long distance lines. For the echo canceler, the level of thetransmission signal from FAX 1 is compared with the level of the reception signal from FAX2. When the transmission signal islarger, S1 is closed while S2 is opened when it is smaller. In other words, for transmission from FAX1, S1 is closed and S2 isopen, so that the echo does not return to FAX1.80KX-FP362BX