Operating Instructions114 No Items Factory Defaultvalue Indispensable setting Note7 1. White Balance Auto Auto, Fixed (Indoor/Fluorescent_1/Fluorescent_2/Outdoor), HoldCameraSetup 2. Power Line Frequency 60 Hz 60 Hz, 50 Hz3. Brightness Control4. Pan/Tilt/Preset ControlEnableEnable------5. Preset Program Control Enable - -8 Multi-Camera6. Zoom Control Enable - -7. Focus Control Enable ----Required when using Multi-Camera-8. Pan Range (Minimum) -175 degree -175 — +175 degree, current-175 — +175 degree, current(Home Position) 0 degree -(Maximum) +175 degree9. Tilt Range (On the table) Selected ---(Minimum) -120 degree - -120 — 0 degree, current(Home Position) -90 degree -120 — 0 degree, current(Maximum) 0 degree -120 — 0 degree, current-Tilt Range (On the ceiling) Not-selected ---(Minimum) 0 degree - 0 — +90 degree, current(Home Position) +90 degree 0 — +90 degree, current(Maximum) +90 degree 0 — +90 degree, current--No checkIP Address or Host Name [Blank] (*1) or (*5) 1 to 255 Characters1. 2nd Network Camera - -Required when using Multi-CameraRequired when using Multi-CameraRequired when using Multi-CameraRequired when using Multi-CameraRequired when using Multi-CameraCamera Name [Blank] (*3) and (*7) 1 to 15 Characters2. 3rd Network Camera No check - -IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 CharactersCamera Name [Blank] (*3) and (*7) 1 to 15 Characters3. 4th Network Camera No check - -IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 CharactersCamera Name [Blank] (*3) and (*7) 1 to 15 Characters9 External OutputControl 1. Open/Short to GND Open --175 — +175 degree, current