Operating Instructions[For assistance, please call: 1-800-272-7033] 1275.5 Confirmation of Network Camera OperationThis procedure checks the Network Camera operation. IP address of the PC hasto be on the same network to be able to access Network Camera. If Top Pageappears, Network Camera has no defect.1. Push the FACTORY DEFAULT RESET button as illustrated on page 109. Allsettings on Network Camera will be set to default.2. Connect locally between the PC and Network Camera like [Type 1] or [Type4] configuration type shown on page 18 and page 19.3. Follow the next steps distinguished by the operating system in the next tableto open TCP/IP Properties window.NoteWhen using Windows NT, Windows 2000 and Windows XP, log on as anadministrator to access TCP/IP Properties window.TCP/IP Properties TableOperatingSystem StepsWindows 95Windows 98Windows Me[Start] –> [Settings] –> [Control Panel] –> [Network] –>Select [TCP/IP] with adaptor in use –> [Properties] –>[Specify an IP address]Windows NT [Start] –> [Settings] –> [Control Panel] –> [Network] –>[Protocols] tab –> [TCP/IP Protocol] –> [Properties] –>Select [Adaptor] in use –> [Specify an IP address]Windows2000[Start] –> [Settings] –> [Control Panel] –> [Network andDial-up Connections] –> [Local Area Connection Icon] inuse –> [Properties] –> Select Internet Protocol [TCP/IP]–> [Properties] –> [Use the following IP address]Windows XP [Start] (–> [Settings]) –> [Control Panel] –> [Network andInternet Connections] –> [Network Connections] –>[Local Area Connection Icon] in use –> [Properties] –>Select Internet Protocol [TCP/IP] –> [Properties] –> [Usethe following IP address]