Operating Instructions[For assistance, please call: 1-800-272-7033] 1295.6 FCC and Other InformationThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Environment: Do not install Network Camera where the temperature is less than0 °C (+32 °F) or greater than +40 °C (+104 °F). Allow 10 cm (4 inches) clearancearound the unit for proper ventilation. Avoid excessive smoke, dust, mechanicalvibration, shock, or direct sunlight.Routine care: Wipe the unit with a soft cloth. Do not use benzine, thinner, or anyabrasive powder. When you leave the unit unused for a long period of time, unplugthe AC adaptor from the outlet.If there is any trouble: Consult an authorized Panasonic Factory Service Center.CAUTION:Any changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this device.No responsibility will be taken by our company with respect toconsequences resulting from the use or the damage or both of NetworkCamera.