Panasonic KX-HCM280 Operating Instructions Manual

Also see for KX-HCM280: Operating instructions Getting started Operating instructions Service manual

Contents

Operating Instructions423.3.1 Using Operation BarOperation bar controls the general use of Network Camera. The following sectionsdescribe the general way of using it.(1) End Display: When Pan/Tilt operation has reached theend, Left End, Right End, Up End or Down Endappears. When Zoom/Focus operation has reached theend, Wide End, Tele End, Near End or Far End appears.Locked Display: Pan/Tilt/Preset, Brightness Control,Preset program, Zooming and Focusing can be locked.Locked appears when the operation bar is clicked.Preset Display: Preset name appears when clickingPreset Button.(2) Pan/Tilt Scan, Pan/Tilt and Home Position:Refer to page 43.(3) Zoom Buttons: Refer to page 45.(4) Focus Buttons: Refer to page 46.(5) Preset Buttons: Refer to page 48.(6) Brightness: Brightness control has nine steps including[STD] (Standard). Clicking [-] and [+] buttons changes thebrightness of image. Brightness can be locked on CameraSetup window on page 84.(7) Resolution: [640 x 480], [320 x 240] (default) or [160 x120](8) Image Quality: [Favor Clarity] optimizes the image forgood clarity. [Standard] keeps the standard quality.[Favor Motion] optimizes the image for motion display.(9) Image Size: The default image size is x 1. [x 1.5] expandsonly the size. The resolution does not change.(10) Buffered Image: [Start Capture] starts buffering theimage. [Viewer] links to the Buffered Image screen onpage 51. Each button changes to [Primary] and[Secondary] button when using Image Transfer feature.(11) Link Buttons: Each buttons link to Multi-Camera screen,Top Page and Help Page.(1)(3)(4)(6)(9)(7)(2)(5)(8)(10)(11)