Panasonic KX-HCM280 Operating Instructions Manual

Also see for KX-HCM280: Operating instructions Getting started Operating instructions Service manual

Contents

Operating Instructions[For assistance, please call: 1-800-272-7033] 125Registered Pan/Tiltpositions noticeablydeviate from actualones.When moving Pan/Tilt not using the operation bar, e.g.revolving it manually, restart Network Camera.Image is out offocus.• The lens is dirty or dust is attached. Fingerprints, dust,stains, etc. on the lens can degrade the performance of theAutomatic Focusing feature. Clean the lens with lenscleaner.• Manual focusing may be set. Press appropriate one of theFocus buttons at the operation bar. Refer to page 46 forFocus buttons.• Blurred images may have been registered when registeringor modifying the preset button or home position button.Adjust the focus in manual focusing again, or press the AFbutton.• The image may be out of focus, if the object is too near, ordepending on the zoom position. Move the object offNetwork Camera, or adjust the zoom position.• Some objects are difficult to focus on by AF button. Pressthe AF button and put it into operation again. When theobjects are still out of focus, adjust the focus using manualfocusing, or change the objects using Pan/Tilt operation orZooming features. Refer to page 46.The color of theimage is strange.• Adjust White Balance by Camera Setup window. Refer topage 84.• To insure the images you are viewing are the best they canbe, set the Display property setting (color quality) to 24 bitor higher. Refer to page 10.Image flickers. • If the object is dark, the image will flicker. Make thecondition around Network Camera brighter.• Wrong power line frequency makes images flicker.Refer to page 84.About Top View Image screenProblem Cause and Remedy