Handset soft key iconsIcon ActionReturns to the previous screen oroutside call.Displays the menu.OK Accepts the current selection.Makes a call. (page 15)Temporarily turns off the ringerfor incoming calls. (page 15)Places a call on hold.Opens the phonebook.Allows you to edit phonenumbers. (page 30)Adds new entry. (page 21)Displays phonebook searchmenu. (page 21)Turns the key lock feature off.(page 19)Stops alarm. (page 29)Snooze button on the alarm.(page 29)Selects entries or handsets.(page 30)n Stops recording, playback, oralert.Stores phone numbers.(page 20)Saves the settings. (page 33)Erases the selected item.Allows you to make an intercomcall. (page 19)CErases a number/character.Puts the call on mute.Refreshes the sensor status.(page 42)Turns the smart plug on.(page 43)Turns the smart plug off.(page 43)Turning the power on/offPress MeN for about 2 seconds.Registering the handsetRegistering a handset to the hubThis procedure is not required for devicesthat were included as part of a bundle.Before you can use the handset, it must beregistered to the hub.If you purchased handsets separately (i.e., notas part of a bundle), use the followingprocedure to register each handset to the hub.1 Hub:Press and hold M A HANDSET/LOCATORN until the LED indicator blinksin green.R If all registered handsets start ringing,press M A HANDSET/LOCATORNagain to stop, then repeat this step.2 Handset:Place the handset on the charger, thenwait until a long beep sounds.Language settingsDisplay language1 M N#1102 MbN: Select the desired setting. a MOKN3 MeNRecording your greetingmessageYou can record your own greeting messageinstead of using a pre-recorded greetingmessage. See page 34 for details.1 M N#30213Getting Started