Panasonic KX-HNH100AZ Operating Instructions Manual

your new PIN. The unit will not reveal thePIN to you. If you forget your PIN, contactan authorised service centre.1 M N#1322 Enter the current 4-digit hub PIN (default:“0000”).3 Enter the new 4-digit hub PIN. a MOKN4 MbN: “Yes” a MOKN a MeNChanging the unit’s regionsetting/Resetting the hub1 M N#1362 MbN: Select the desired country. a MOKN3 MbN: “Yes” a MOKN a MeNNote:R Changing the unit’s region setting maycause the settings for your country or yourcustomised settings to return to their defaultsettings.Registering a handset to the hubIf for some reason the handset is notregistered to the hub (for example, isdisplayed even when the handset is near thehub), re-register the handset.1 Handset:M N#1302 Hub:Press and hold M A HANDSET/LOCATORN until the LED indicator blinksin green.R If all registered handsets start ringing,press M A HANDSET/LOCATORNagain to stop, then repeat this step.3 Handset:MOKN a Wait until “Hub PIN” isdisplayed. a Enter the hub PIN (default:“0000”). a MOKNR If you forget hub PIN, contact anauthorised service centre.Deregistering a handsetA handset can cancel its own registration tothe hub, or other handsets registered to thesame hub. This allows the handset to end itswireless connection with the system.1 M N#131R All handsets registered to the hub aredisplayed. If mobile devices(smartphones, tablets, etc.) areregistered to the hub, you can alsoselect and deregister them using thisprocedure.2 MbN: Select the handset you want tocancel. a MOKN3 MbN: “Yes” a MOKN a MeNWi-Fi® settingsYou can use the Home Network app to accessthe system from your mobile device(smartphone, tablet, etc.). The app offers avariety of features that you can enjoy evenwhen away from home. For more informationabout the app, see page 43.In order to access the system from yourmobile device, you must first configure the hubto connect to your wireless router.Note:R Make sure your wireless router is turned onand functioning.R Make sure that you know your wirelessrouter’s Wi-Fi settings, including its SSID(wireless network name), securitypassword, etc. In some situations, you mayalso need to know the IP-related settingsrequired in order for the hub to connect toyour wireless router, including your wirelessrouter’s IP address, subnet mask, etc.R Make sure you have the operatinginstructions included with your wirelessrouter handy.R The hub cannot find your wireless router ifthe wireless router does not broadcast itsSSID. If there is a “stealth mode” setting,turn it off; if there is a “SSID broadcast”setting, turn it on. Change the appropriatesetting before performing this procedure,and then change it back when finished.32Programming