4-18 System Programming4.2 Manager ProgrammingSystem Speed Dialing Number Set001Description Used to program the System Speed Dial numbers. These numbersare available to all extension users. There are 100 numbers from 00to 99.Selection • Speed dial number: 00 through 99• Telephone number: 24 digits (max.)Default All speed dial numbers – Not storedProgramming 1. Enter 001.Display: 001 SYS SPD DIAL2. Press NEXT.Display: SPD Code?→3. Enter a speed dial number.To enter speed dial number 00, you can also press NEXT.Display example: 00:Not Stored4. Enter a telephone number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new number.5. Press STORE.6. To program another speed dial number, press NEXT orPREV, or SELECT and the desired speed dial number.7. Repeat steps 4 through 6.8. Press END.Conditions • Each speed dial number has a maximum of 24 digits. The validcharacters are 0 through 9, the and # keys, and the FLASH orFLASH/RCL, PAUSE, SECRET and – (hyphen) buttons.– To store a flash signal, press FLASH or FLASH/RCL.Note: The stored flash will only be effective during a call.(Refer to Section 3, “External Feature Access”.)– To store a hyphen, press the “–” button.– To store a pause, press PAUSE.(Refer to Section 3, “Pause Insertion, Automatic”.)
