4.3 System ProgrammingAccount Codes1054-38 System ProgrammingDescription Assigns the account codes for Account Code Entry, Verified – AllCalls and Verified – Toll Restriction Override modes. If Verified –All Calls is assigned in program [508] “Account Code EntryMode”, an account code is required to make an outside call. IfVerified – Toll Restriction Override is assigned, an account code isonly required for a toll call and overrides toll restriction.Selection • Location number: 01 through 20• Account code: 10 digits (max.)Default All locations – Not storedProgramming 1. Enter 105.Display: 105 ACCT CODES2. Press NEXT.Display: Location NO?→3. Enter a location number.To enter location number 01, you can also press NEXT.Display example: 01:Not Stored4. Enter an account code.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new accountcode.5. Press STORE.6. To program another location, press NEXT or PREV, orSELECT and the desired location number.7. Repeat steps 4 through 6.8. Press END.Conditions • Each verifiable account code has a maximum of 10 digits, consisting of0 through 9.• Program [508] “Account Code Entry Mode” is used to select theAccount Code Entry mode.• Account codes having “99” in any part or ending with “9” are invalid,as “99” is used as a delimiter when entering an account code.Feature References Section 3, FeaturesAccount Code EntryToll Restriction Override by Account Code Entry
