DPT Features 4-454.2 DPT Features CCall Transfer — to Outside LineAllows you to transfer the call you received to an external party.During a conversation;1. Press the TRANSFER button.• The other party is placed on hold.• You hear a confirmation tone and then a dial tone.2. Press a CO button or dial the line access code (9 or 81 through83).3. Dial the phone number where calls will be transferred.4. Wait for an answer and announce.5. Hang up or press the SP-PHONE button.• The call is transferred.Conditions• If you misdial, press the FLASH or FLASH/RCL button, and re-enter the number.• If you want to return to the held call, press the TRANSFER button or correspondingCO or INTERCOM button before the destination party answers.• Execution of this feature is determined by the “Class of Service” assigned to the extension.• If a call between two external parties is established, an alarm tone is sent to both partiesfifteen seconds before the assigned duration time limit (default: 10 min.). “HoldRecall” is generated to the transferring extension fifty seconds before time out.• If you want to join the conversation after transferring the call or while hold recall toneis sent, press the corresponding CO button. A conference call is established.Programming References• System Programming — Installation Manual[206] Outside-to-Outside Line Call Duration Time[503] Call Transfer to Outside Line[601] Class of ServiceFeature ReferencesHold Recall (→ see Installation Manual)3phone number5124COTRANSFER
