5-16 Standard Telephone FeaturesC 5.2 Standard Telephone Features• Setting a new “Call Forwarding” function (All Calls, Busy, Busy/No Answer, etc.)cancels any other “Call Forwarding” functions and the “Do Not Disturb (DND)” featurewhich have been set beforehand.• A floating extension such as a DISA (Direct Inward System Access) or external pagercannot be programmed as the forwarding destination.• Two extensions can set each other as the destination extension. In this case, anintercom call to the other party while he/she is absent will not be forwarded back to theoriginal extension.• Confirmation tone 2 (two beeps) is sent when the previously programmed data is thesame as the new data. If it is not, a confirmation tone 1 (one beep) is sent. Refer to the“Tone List” in the Appendix (Section 7).• You can call the original extension from the Call Forwarding destination extension.(Boss Secretary)Feature ReferencesCall Forwarding — CANCELDo Not Disturb (DND)Voice Mail IntegrationCall Forwarding — All CallsYou can re-direct all of your calls to another extension.Setting1. Lift the handset.2. Dial the feature number (710) and 2.3. Dial the extension number where you wish to forward the call.• You hear a confirmation tone and then a dial tone.4. Hang up.123extension number4
