3-14 User Programming (Manager Programming)3.2 User Programming (Manager Programming)Extension Name Set004Description Assigns names to the extension numbers programmed in program [003]“Extension Number Set”.Selection • Jack number: 1 through 8 (-1 / -2)(-1 = first part, -2 = second part)• Name: 10 characters (max.)Default All jacks – Not storedProgramming 1. Enter 004.Display: 004 EXT NAME SET2. Press NEXT.Display: Jack NO?→3. Enter a jack number.To enter jack number 1, you can also press NEXT.To select the second part (-2), press NEXT after entering a jacknumber.Display: #1-1:Not Stored4. Enter a name.For entering characters, see “Station Speed Dialing Number/NameAssignment” in Section 2.2 “Station Programming”.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new name.5. Press STORE.6. To program another jack, press NEXT or PREV, or SELECT andthe desired jack number.7. Repeat steps 4 through 6.8. Press END.Conditions • There is a maximum of 16 names. Each name has a maximum of 10characters.• Program [003] “Extension Number Set” is used to assign extensionnumbers.• For an explanation of jack numbering, see “Rotation of jack number”on page 3-5.
