1.1 General FeaturesFeatures Guide 143* When the contract of your system is point-to-multipoint and if you forget to assign an MSNnumber at SSD & ICH locations 500-699, the system will not receive calls with that MSN.An outside call is made.YesNoIs the CLIP or DDI/MSN numberassigned at the location 000-499 forCLIP or 500-699 for DDI/MSN?Checks the CLIP and DDI/MSN numberthrough the SSD & ICH numbers from 000to 699. [001] (As a result, the CLIP numberswill be analysed first.)Checks ICH table number either Day orNight mode. [024]The call will be handled depending onICH table assignment.The call will be received at an extensiondepending on the handling table number 61(for Day mode) or 62 (for Night mode).There might be a case that 61 and 62will not distribute calls.*AssignedNot assignedWhen "BV" is selected inprogramme [455].When "DISA" isselected inprogramme [455].When "Disable "is selected inprogramme [455].None of the BVresources are available.A B C CFlowchart of possible cases and results for the Intelligent Call Handling[***]: indicates the related/required systemprogramming numbers for each assignment.
