2.4 TRS / ARS Programming156 General Programming[314-321] ARS Leading Digit Entry for Plans 1 through 8DescriptionBy entering numbers into each leading digit plan (programmes below) you are starting theprocess to determine which outside line group will be used to route the call.These eight plans are used to analyse the number which the user dials and decide the route planfor the call. If the user-dialled number is registered in Plan 1, then Routing Plan 1 is selectedfor the call. Automatic Route Selection (ARS) Leading Digit Entry for Plans 1 through 8 matchARS Routing Plans 1 through 8 (programmes [322] through [329]) respectively.Selection• Location number: 001 through 100• Leading digit number: 10 digits (max.)DefaultAll locations – Not storedProgramming1. Enter a program address (314 through 321).Display example: 314 ARS LEAD D-12. Press NEXT.Display: Location NO?3. Enter a location number.To enter location number 001, you can also press NEXT.Display example: 001:Not Stored4. Enter a leading digit number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new number.5. Press STORE.6. To programme another location, press NEXT or PREV, or SELECT and the desiredlocation number.7. Repeat steps 4 through 6.8. Press END.Programme [314] [315] [316] [317] [318] [319] [320] [321]Plan 1 2 3 4 5 6 7 8
