2.4 TRS / ARS ProgrammingGeneral Programming 165[340] TIE Line Routing TableDescriptionThe TIE line routing table can be programmed. This table is referenced by the system toidentify the outside line route, when an extension user makes a TIE call.A routing pattern appropriate for each call is decided by the first three digits (except the TIEline access number) of the dialled number. This programme assigns the TIE line access numberand outside line group hunt sequence.Selection• Location number: 01 through 32• TIE line access number: 1 through 3 digits• Outside line group hunt sequence number: 1 through 8 (5 entries max.)DefaultAll locations – Not storedProgramming1. Enter 340.Display: 340 TIE ROUTE2. Press NEXT.Display: Location NO?3. Enter a location number.To enter location number 01, you can also press NEXT.Display example: 01:4. Enter a TIE line access number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new number.5. Press to programme the outside line group hunt sequence number.6. Enter an outside line group hunt sequence number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new number.7. Press STORE.8. To programme another location, press NEXT or PREV, or SELECT and the desiredlocation number.9. Repeat steps 4 through 8.10.Press END.
