2.7 Extension ProgrammingGeneral Programming 251[607-608] Doorphone Ringing Assignment – Day / NightDescriptionThese programmes assign the extensions which will ring when a doorphone call is receivedduring the day and night modes. Programmed extensions are also allowed to open the door.Selection• Jack number:KX-TD816 – 01 through 16 (-1 / -2),KX-TD1232 – 01 through 64 (-1 / -2),( =all jacks, -1 = first part, -2 = second part)• Doorphone number:KX-TD816 – 1 and 2, two entries (max.)KX-TD1232 – 1 through 4, four entries (max.)DefaultJack 01-1– All doorphones; Other jacks – no doorphone (Day / Night)Programming1. Enter a programme address (607 for day or 608 for night).Display example: 607 DOOR SET DAY2. Press NEXT.Display: Jack NO?3. Enter a jack number.To enter jack number 01, you can also press NEXT.To select the second part (-2), press NEXT after entering a jack number.Display example: #01-1:12344. Enter the doorphone numbers.To assign no doorphone, press CLEAR.To change the current entry, press CLEAR and enter the new doorphone numbers.5. Press STORE.6. To programme another jack, press NEXT or PREV, or SELECT and the desired jacknumber.7. Repeat steps 4 through 6.8. Press END.Conditions• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through64 are for the Slave, if available.
