2.5 Outside Line ProgrammingGeneral Programming 193[415] CPC Signal Detection Outgoing SetDescriptionEnables or disables Calling Party Control (CPC) Signal Detection during the time between theoriginated outside call and the established outside call. If this is enabled, the systemdisconnects the line with the time set in programme [405] CPC Signal Detection Incoming Setwhen the CPC Signal is detected.Selection• Outside line (CO) number:KX-TD816 – 01 through 08,KX-TD1232 – 01 through 24,( =all outside lines)• Enable (detection) / Disable (no detection)DefaultDisableProgramming1. Enter 415.Display: 415 CPC OUTGOING2. Press NEXT.Display: CO Line NO?3. Enter an outside line number.To enter outside line number 01, you can also press NEXT.Display example: CO01:Disable4. Keep pressing SELECT until the desired selection is displayed.5. Press STORE.6. To programme another outside line, press NEXT or PREV, or SELECT and the desiredoutside line number.7. Repeat steps 4 through 6.8. Press END.Conditions• Some central offices (CO) may send CPC-like signals during the dialling sequence and anattempt to make a call may be terminated. If your CO is such a type, select "Disable".• Programme [405] CPC Signal Detection Incoming Set is used to set CPC Signal DetectionTime.
