1. Understanding Your Phone14 Issued April 2000 DBS-32-755Using Variable Mode on a Small-Display PhoneNote: This feature requires DBS software version CPC-AII/B v. 8.0 or higher,CPC-S/M v. 2.0 or higher, or CPC-EX v. 1.0 or higher.Variable Mode allows you to use the soft keys on your small-display phone toexecute programmed system features when your phone is in the followingcall states:• during an intercom call• during CO dial tone• during a trunk call• after dialing a busy extension1. Activate Variable Mode by pressing ON/OFF *61 ON/OFF.The 1st line of the display will read “Variable md ON” when you enter*61, then return to normal when you press the second ON/OFF.To turn Variable Mode off again, press ON/OFF *61 ON/OFF.2. During an intercom call, CO dial tone, trunk call, or after dialing a busyextension, the display will reflect the appropriate programmed features.While the feature is displayed, press the > or < soft key to execute thedesired feature.Figure 4. Example of a variable mode display after dialing a busy extensionEN DM O D EBusy 351C allback O H VA
