Panasonic KX-TDA User Manual

Also see for KX-TDA: Quick user guide

Contents

Panasonic KX-TDA User Manual Manual pdf 42 page image

3. Placing Outside Calls40 Issued April 2000 DBS-32-755Checking SSD Numbers Using the SoftKeys1. Scroll through the System Speed Dial directory until the desired SSD nameis displayed.2. Pick up the handset or press ON/OFF.3. Press CONF.4. Press the soft key next to the SSD entry. The SSD number appears on thedisplay.Chaining Speed Dial NumbersTo handle phone numbers longer than 16 characters, you can chain SSDcodes to a PSD code. When you dial the PSD code, the system will dial eachSSD number contained in the chain.• Systems using DBS software version CPC-EX v. 1.0 or higher alsoallow you to chain SSD codes to each other, and to chain PSD codes toeach other. (You cannot, however, chain PSD codes to an SSD code.)• A maximum of 16 characters, including other speed dial codes, can beentered into a speed dial code.Note: Before chaining, enter the parts of the phone number into one-touch orsoft keys, or into speed dial bins. For example, program the first part into one-touch key #1, the second part into one-touch key #2, etc.Complete the following steps to chain speed dial numbers:1. Pick up the handset or press ON/OFF.2. Press PROG, AUTO.3. Enter the speed dial code (or press the one-touch key if using a PSDnumber) you are chaining the other codes to.4. Press AUTO and enter the speed dial code containing the first part of thenumber to be dialed.5. Repeat step 4 for each remaining speed dial code to be contained in thechain.6. Press HOLD.