3.3 PT ProgrammingFeature Guide 273Entering System Programming ModeUsing a PT to perform system programming allows an authorized extension user to set a wide range of PBXfeatures and parameters.There are two levels of system programming that can be performed with a PT—administrator levelprogramming and user level programming.Administrator Level: All system programming that can be performed with a PT is accessible.User Level: System programming that has been made accessible to PT users through PC programmingcan be performed.Noteis used throughout these pages to indicate the default value for the given setting.Programming StructureProgramming Number Programming Group Title Description[0XX] Basic Programming Frequently used programming steps[1XX] System ManagementProgrammingGlobal system parameters[2XX] Time Programming Flexible system timers[3XX] TRS/ARS Programming Toll Restriction (TRS) and Automatic RouteSelection (ARS) parameters[4XX] CO Line Programming CO line and CO line group settings[5XX] COS Programming COS parameters[6XX] Extension Programming Assignment of extension features[7XX] Resource/InterfaceProgrammingAssignment of various interfaces of the PBX[8XX] SMDR & MaintenanceProgrammingSetting of Station Message Detail Recording(SMDR) and maintenance features[9XX]Card Programming Used to display the cards currently installed inthe PBX, or to "delete" a card from systemprogramming before physically removing it.PROGRAM/PAUSE#= 1234System Password for Administrator Programming No.3 digits—for PT Programming= 1234Programming No.3 digitsSystem Password for User—for PT ProgrammingPROGRAM/PAUSE
