4.5 UtilityFeature Guide 325To transfer OGMs to an OPB card1. From the Utility menu, select Message File Transfer PC to PBX.2. Select the target MSG card from the drop-down list, and click OK.The Open dialog box will be displayed.3. Select the message files to upload.It is possible to select multiple files.4. Click OK.The files will be uploaded. Files that do not contain message data will be ignored.When complete, the display will return to the main screen.4.5.7 Utility—Message File Transfer PBX to PCTransfers Outgoing Message (OGM) files from the OPB card to the PC.This option is only available at Installer level, and requires that at least 1 MSG card is installed, and the OPBcard that it is mounted on is set to OUS status.To transfer OGMs to the PC1. From the Utility menu, select Message File Transfer PBX to PC.2. From the upper drop-down list, select the target MSG card.3. From the lower drop-down list, select the messages to transfer.• To transfer a certain message, select the number of that message.• To transfer all messages at once, select "ALL".The Save dialog box will be displayed.4. Enter a file name.5. Click Save.6. Click OK.When you choose to transfer all messages, each message is saved as an individual file, with a numberappended to the file name corresponding to that message's location on the OPB card.When complete, the display will return to the main screen.4.5.8 Utility—Error LogCollects and displays system error information.Whenever there is a system failure, the PBX stores the error code generated. The connected PC collectsall of these codes, along with other information, and displays an explanatory error message.The functions of the buttons on this screen are as follows:Button FunctionCancel Closes the Error Log screen without saving.Capture Saves the currently displayed Error Log information as a text file.Minor Displays minor errors, which affect only a certain part of systemoperation.
