1.19 Voice Mail FeaturesFeature Guide 1431.19 Voice Mail Features1.19.1 Voice Mail APT IntegrationDescriptionA Panasonic Voice Processing System (VPS) that supports APT Integration can provide many features andconveniences that are unachievable using traditional voice mail systems that rely on Inband (DTMF)Integration.Many of these features are explained below. For more information, refer to the Installation Manual suppliedwith the Panasonic VPS.1. Automatic Configuration—Quick Setup (or DIP switch initialisation without a PC)The PBX shares information with the VPS during setup that allows the VPS to automatically create theappropriate mailboxes for all extension numbers.The following settings to enable APT Integration must be programmed through system programming tomatch the settings of the VPS.When 2 VPSs are connected to the PBX, note that each extension can have only one mailbox, but whenthe VPSs have executed Automatic Configuration, an extension has a mailbox in both VPSs. Therefore,an extension user must delete a mailbox in either VPS so that there are no duplicates.This example uses a Panasonic KX-TVP50 series VPS, which can be connected with 4-conductor wireto 4 extension jacks of the PBX.[Programming Example: Voice Mail Table]In this example:When "Port 7 & 8" is selected for VPS1, extension jacks 07 and 08 are placed in extension group 7automatically ( Extension Group [600]). Likewise, when "Port 15 & 16" is selected for VPS2,extension jacks 15 and 16 are placed in extension group 8 automatically. Each extension group can beAPT Integration VM 1 APT Port* 1 VM 2 APT Port* 2Enable Port 7 & 8 Port 15 & 16*1 VM 1 APT Port [130]*2 VM 2 APT Port [131]PBXVPS7 Port 1Port 2VPSPort 1Port 215168Extensiongroup 7Extensiongroup 8
