3.3 PT Programming228 Feature GuideDialling Start Time [206]Note* The minimum length of time that the PBX waits after seizing an outside (CO) line before dialling thatcan be selected depends on your country/area as follows:For Czech Republic: 0 ms, 250 ms, 500 ms, 750 ms, 1000 ms, 1250 ms, 3500 msFor Others: 0 ms, 250 ms, 500 ms, 750 ms, 1000 ms, 1250 ms, 1500 msFeature & Programming References1.5.3.3 Outside (CO) Line AccessHookswitch Flash Timing Range [207]Feature & Programming References1.12.1 Call HoldInter-digit Time [208]Feature & Programming References1.8.1 Toll Restriction (TRS)No Dial Disconnection [211]DTMF Time [210]NoteThis programme selects the minimum duration of the DTMF signal sent to outside (CO) lines that havebeen set to "DTMF" in Dial Mode [401].Feature & Programming References1.5.2.4 Dial Type Selection2 0 6 NEXT SELECT STORE ENDRefer to the note.*2 0 7 NEXT SELECT STORE END(MODE1: 50-180 ms/MODE2: 80-180 ms/MODE3: 80-650 ms/MODE4: 80-1000 ms/MODE5: 200-1000 ms)2 0 8 NEXT SELECT STORE END(5/10/15/20 s)2 1 0 NEXT SELECT STORE END(MODE1: 80 ms/MODE2: 160 ms)
