3.3 PT ProgrammingFeature Guide 247Call Charge Table Assignment [442]Feature & Programming References1.20.2 Call Charge CalculationDISA Incoming Call Dial Mode [500]NoteWithout AA: Available destinations are extension numbers assigned in Extension Number [009],Outside (CO) Line Access numbers (9/0 [for New Zealand: 1 or 9], 81 through 88), and the OperatorCall number (0 or 9)With AA: Available destinations are numbers available in "Without AA" mode and numbers (0 through9) assigned in DISA Built-in AA [501]Feature & Programming References1.15.6 Direct Inward System Access (DISA)DISA Built-in AA [501]NoteIf you would like to use the Automatic Line Access number (9/0 [for New Zealand: 1 or 9]) and/orOperator Call number in AA mode, do not assign AA number(s) that correspond to Automatic LineAccess or Operator Call numbers (9 and/or 0).Feature & Programming References1.15.6 Direct Inward System Access (DISA)4 4 2 NEXT CO line no. STORE END(1…8/ )SELECTSELECTNEXT PREVorTo continueTo continue(Table1/Table2/Table3/Table4)5 0 0 NEXT SELECT STORE END(Without AA/With AA)5 0 1 NEXT AA no. STORE END(0…9) (Jack/GRP/3-level AA/Not Stored)To continueSELECTNEXT PREVor(01…24)extensionjack no.extensiongroup no.(1…8)or
