47Cordless TelephoneFor assistance, please call: 1-800-211-PANA(7262)FLASH ButtonPressing (FLASH/CALL!WAIT) allows you to use special features of yourhost PBX such as transferring an extension call or accessing specialtelephone services (optional) such as call waiting.•Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialingmode or the mute (p. 46).Selecting the flash timeThe flash time depends on your telephone exchange or host PBX.You can select the following flash times: “700, 600, 400, 300, 250, 110, 100or 90 ms (milliseconds)”. Your phone comes from the factory set to “700 ms”.Make sure the unit is not being used and the handset is lifted off the base unit.1 Press (MUTE/FUNCTION) and scroll to “Initial set” by pressingÖ or Ñ, and press á.2 Scroll to “Set tel line” by pressingÖ or Ñ, and press á.3 Scroll to “Set flash time” by pressingÖ or Ñ, and press á.•The current setting is displayed.4 Select the flash time by pressing Ö or Ñ.5 Press á (Save key).•A beep sounds.•To exit the programming mode, press (OFF).Set flash time:700msGF H=SaveSet dial modeHSet flash timeSet line modeCaller ID editHSet tel lineSet answeringHow to Use the PAUSE Button(For PBX Line/Long Distance Calls)We recommend you press (PAUSE/REDIAL) if a pause is required fordialing with a PBX or to make a long distance call.Ex. Line access number (9) (PBX)(9) \ (PAUSE/REDIAL) \•Pressing (PAUSE/REDIAL) once creates a 3.5 second pause. This preventsmisdialing when you redial or dial a stored number.•Pressing (PAUSE/REDIAL) more than once increases the length of the pausebetween numbers.Phone number•If the unit is connected via a PBX, PBX functions (transferring a call etc.) mightnot work correctly. Consult your PBX supplier for the correct setting.