57Answering SystemFor assistance, please call: 1-800-211-PANA(7262)Direct Remote OperationOnce you have entered the remote code, you can also control your unit bydirect commands instead of using the voice menu. To end the remoteoperation, hang up anytime.Direct commandsNEW MESSAGE PLAYBACK•Only new messages areplayed back.ALL MESSAGE PLAYBACK•All messages are played back.REPEAT (During playback)•The current message isrepeated.•If you press within 5 secondsof playback, the previousmessage will be played.SKIP (During playback)•The current message isskipped. The next message isplayed.STOP•Operation is stoppedtemporarily.•To resume operation, enter adirect command within 15seconds, or the voice menuwill start (p. 56).(4)(5)(1)(2)(9)ERASING A SPECIFICMESSAGE(During playback)•The current message iserased.•A short beep will soundand the next message willbe played.ERASING ALL MESSAGES•All recorded messages areerased.•A long beep sounds, and“No messages” is heard.ANSWERING SYSTEM OFF•The unit hangs up and willnot answer calls untilturned on again(p. 49, 53, see below).(*)(4)(*)(5)(0)Turning on the Answering SystemCall your unit and wait for 15 rings.•The unit will answer and the greeting message will be played.•The Answering System will be turned on. Hang up or enter the remote code forother options.•When turning on the Answering System using a rotary or pulse service telephone,you cannot enter the remote code for other options.Skipping the greeting messageAfter calling your unit, press (*) during the greeting message.•The unit skips the rest of the greeting message and you can start recording yourmessage after the long beep.