53Answering SystemFor assistance, please call: 1-800-211-PANA(7262)For assistance, please call: 1-800-211-PANA(7262)•The unit will announce the remaining recording time after playback, if it is lessthan 5 minutes.•If a call is being received during the remote operation, you will hear incomingcall tones (p. 48). To answer the call, press or .•If you hear “Memory full” after playback, erase some, or all, of the messages(see below).Direct commandsNEW MESSAGE PLAYBACK•Only new messages areplayed back.ALL MESSAGE PLAYBACK•All messages are played back.REPEAT (During playback)•The current message isrepeated.•If you press within 5 secondsof playback, the previousmessage will be played.•You can also press Ü torepeat a message.SKIP (During playback)•The current message isskipped. The next message isplayed.•You can also press á to skipa message.STOP•Operation is stoppedtemporarily.•To resume operation, enter adirect command within 15seconds, or the voice menuwill start (p. 52).(4)(5)(1)(2)(9)ERASING A SPECIFICMESSAGE(During playback)•The current message iserased.•A short beep will soundand the next message willbe played.ERASING ALL MESSAGES•All recorded messages areerased.•A long beep sounds, and“No messages” is heard.ANSWERING SYSTEM OFF•“Answer off” is heard andthe Answering System isturned off.ANSWERING SYSTEM ON•“Answer set” is heard andthe Answering System isturned on.(*)(4)(*)(5)(0)(8)