Off (invisible) The line is free.On The line is being used.Flashing A call is on hold within this system (handset or base unit)or the Answering System is responding to a call (p. 66).Flashing quickly A call is being received.SP PRIVACY [1]Received callsG01IN USEPRIVACY P L A Y10DisplaysHandset#“ ”(IN USE icon) functions as follows.$“SP” shows when you are using the handset speakerphone during anintercom call or a conference call, while listening to messages or whilein the 2-Way Radio mode. When you monitor a room from the speaker,“SP” will also be displayed.%“ ” (directory icon) is displayed when storing, viewing, sending orreceiving the directory items (p. 42).&“PRIVACY” indicates the Call Privacy mode is on (p. 55). The base unitand other handsets cannot join your conversation.'The battery icon indicates the battery strength (p. 12).(The extension number of the handset is displayed if the handset hasbeen registered to the base unit (p. 26, 85).)The display shows the dialed number, call status, programming optionsand directory items etc. If you subscribe to a Caller ID service, callerinformation will be displayed. “Received calls” will be displayedwhen new calls have been received.*The prompts on the bottom line will show corresponding functions of thethree soft keys which are located directly below the display (p. 9).Ex. The soft key below “ ” will function as key.+“ ” (extension icon) is displayed with the extension numbers during anintercom (p. 49) or a conference call (p. 54), or while using the RoomMonitor feature (p. 57) or the 2-Way Radio mode (p. 59).Backlit LCD displayThe lighted handset display will stay on for a few seconds after pressing ahandset button to start operations, lifting the handset or pressing a buttonto complete operations such as hanging up a call, viewing the CallerList/Directory or programming.PLAYPLAY)+*# $ % & ' (IN USE