Panasonic KX-TG2730S Operating Instructions Manual

Also see for KX-TG2730S - 2.4 GHz DSS Expandable Cordless Phone: Description Operating instructions Operating instructions

Contents

Panasonic KX-TG2730S Operating Instructions Manual Manual pdf 66 page image

To erase the password on the base unit (when you cannot use the handset):If you cannot remember the password,you can retrieve messages from Mailbox2 or 3 after erasing the password on thebase unit. Please note that the followingsetting will return to the factory presetwith the password.1. Press (PROGRAM).2. Press (MUTE).3. Enter (#)(9)(0)(0)(0).66Mailbox Features•If you do not want the unit to answer calls, press (ANSWER!ON) again to turn offthe Answering System. The indicator light goes out and “Answer off” is heard.•You can also turn on the Answering System remotely using any other phone (p. 78).•If you turn the Answering System on with “ ” flashing, “ ” will disappear butthe clock is still incorrect. Adjust the date and time (p. 21). If you subscribe to aCaller ID service (p. 34), the caller ID information will adjust the clock.Monitoring incoming callsWhile a call is being recorded, you can monitor it through the base unit speaker.•To increase the speaker volume, press Ñ. To decrease, press Ö.To answer the call with the base unit speakerphone, press (DIGITAL!SP-PHONE).For the handset, press or . The unit stops recording.Automatic Answering OperationThe Answering System allows the unit to answer calls with a greetingmessage. Callers can then leave a message in a mailbox (p. 64).Setting the Unit to Answer CallsPress (ANSWER!ON) to turn on theAnswering System.•The indicator lights and the unit announces“Answer set” and the current day and time.•The unit will announce the remainingrecording time if it is less than 5 minutes.•If you hear “Memory full”, “ ” is displayedon the base unit and the ANSWER ONindicator flashes rapidly, erase some, or all, ofthe messages (p. 68).FULL(ANSWERÒON)and IndicatorFunctionDialing modeFlash timeLine modeNumber of ringsRecording timeRemote codeBase unit IncomingCall ToneBase unit RoomMonitor modeFactory presetTone700msA mode43 min.112off