Panasonic KX-TG2730S Operating Instructions Manual

Also see for KX-TG2730S - 2.4 GHz DSS Expandable Cordless Phone: Description Operating instructions Operating instructions

Contents

Panasonic KX-TG2730S Operating Instructions Manual Manual pdf 65 page image

65Answering SystemFor assistance, please call: 1-800-211-PANA(7262)Setting the Mailbox Password (for Mailbox 2 and 3)You can use Mailbox 2 or 3 for your personal mailbox, and prevent unauthorizedpeople from accessing the mailbox and listening to the messages. Assign 2-digitpassword (00–99) to Mailbox 2 or 3. Each password and the remote code (p. 75)must be unique. Once the password is assigned to Mailbox 2 or 3, no one canaccess the mailbox to listen to messages without entering the password.Make sure the base unit and the handset are not being used.1 Press (CONF/FUNCTION), and scroll to“Initial setting” by pressing Ö orÑ, and press á.2 Scroll to “Set answering” by pressing Öor Ñ, and press á.3 Scroll to “Set mailbox2&3” by pressingÖ or Ñ.4 Press á.5 Select the mailbox by pressing Ñ(Mailbox 2) or Ö (Mailbox 3).•If the password has already been assigned tothe mailbox, it is displayed.6 Enter a password using a 2-digit number(00–99).•If you entered a wrong number, press(HOLD/CLEAR) and enter the password again.7 Press the right soft key ( ).•A beep sounds.•If 3 beeps sound, you entered the same password as the other mailbox orthe remote code (p. 75) or the entered password was one-digit. Start againfrom step 6 and select another password.•To exit the programming mode, press (OFF).To check the password: Repeat steps 1 to 5.•The password is displayed. When finished, press (OFF).To erase the passwordPress (HOLD/CLEAR) in step 6, and press the right soft key ( ).•You will be able to access the mailbox without entering the password.SAVESAVESet passwordMailbox2 :--S A V ESet passwordF=Mailbox2G=Mailbox3Set passwordMailbox2 :22S A V ECopy directoryHInitial setting2Way radio modeRemote codeHSet mailbox2&3---------------Set tel lineHSet answeringSet base unit