Intercom/Locator39IntercomIntercom calls can be made betweenhandsets.Note:L If you receive an outside call while talkingon the intercom, you hear 2 tones. Toanswer the call, press {OFF}, then press{C}.L When paging the handset, the pagedhandset beeps for 1 minute.Making an intercom call1 {MENU} s {INT}2 {r}: Select the desired unit. s{SELECT}L To stop paging, press {OFF}.3 When you finish talking, press {OFF}.Answering an intercom call1 Press {C} to answer the page.2 When you finish talking, press {OFF}.Handset locatorYou can locate a misplaced handset by pagingit.1 Base unit: Press {LOCATOR}.L All registered handsets beep for 1minute.2 To stop paging:Base unit: Press {LOCATOR}.Handset: Press {OFF}.Transferring calls,conference callsOutside calls can be transferred or aconference call with an outside party can bemade between 2 handsets.1 During an outside call, press {INT} to putthe call on hold.2 {r}: Select the desired unit. s{SELECT}3 Wait for the paged party to answer.L If the paged party does not answer,press {C} to return to the outside call.4 To complete the transfer:Press {OFF}.L The outside call is being routed to thedestination unit.To establish a conference call:{MENU} s {r}: “Conference” s{SELECT}L To leave the conference, press {OFF}.The other 2 parties can continue theconversation.L To put the outside call on hold:{MENU} s {r}: “Hold” s{SELECT}To resume the conference:{MENU} s {r}: “Conference” s{SELECT}Answering a transferred callPress {C} to answer the page.TG41xxC(e).book Page 39 Wednesday, December 22, 2010 3:59 PM