Panasonic KX-TG4711C Operating Instructions Manual

2 Enter the desired name (max. 10characters; see the character table,page 20).R If not required, go to step 3.3 MSAVEN4 MbN: Select the desired setting. aMSELECTN 2 times5 MOFFNCall block (Call Displaysubscribers only)This feature allows the unit to reject calls when:– the unit receives a call from a phonenumber stored in the call block list asunwanted (“Storing unwanted callers”,page 29).– the unit receives a call without phonenumber (“Blocking incoming calls withoutphone number”, page 29).When a call is received, the unit rings for ashort time while the caller is being identified. Ifthe phone number matches an entry in the callblock list, the unit sends out a busy tone to thecaller, and then disconnects the call.Important:R When the unit receives a call from anumber that is stored in the call block list ora call without a recognized phone number,the call is logged in the caller list(page 33) with after the call isdisconnected.Storing unwanted callersYou can store up to 30 phone numbers in thecall block list.Important:R We recommend storing 10 digits (includingan area code). If only 7 digits are stored, allnumbers that have the same last 7 digitswill be blocked.n From the caller list:1 MFN CID2 MbN: Select the entry to be blocked.R To edit the number, press MEDITNrepeatedly until the phone numberis shown in the 10-digit format.3 MSAVEN4 MbN: “Call block” a MSELECTN5 MbN: “Yes” a MSELECTN6 Edit the phone number if necessary(24 digits max.).7 MSAVEN a MOFFNn By entering phone numbers:1 MMENUN#217 a MADDN2 Enter the phone number (24 digitsmax.).R To erase a digit, press MCLEARN.3 MSAVEN a MOFFNBlocking incoming calls withoutphone numberYou can reject a call when no phone numberis provided, such as a call just showing“Unavailable”.1 MMENUN#2402 MbN: Select the desired setting. aMSAVEN a MOFFNViewing/editing/erasing call blocknumbers1 MMENUN#2172 MbN: Select the desired entry.R To exit, press MOFFN.3 To edit a number:MEDITN a Edit the phone number. aMSAVEN a MOFFNTo erase a number:MERASEN a MbN: “Yes” a MSELECTNa MOFFNNote:R When editing, press the desired dial key toadd, MCLEARN to erase.R When viewing, “Block w/o num” isdisplayed if the blocking incoming callswithout phone number feature is turned on.To turn the feature off: MERASEN a MCNa MSAVEN a MOFFN29ProgrammingTG47xxC(en)_1212_ver021.pdf 29 2011/12/12 14:19:46