Useful InformationAnswering SystemPreparation35Using the Caller ListFor assistance, please call: 1-800-211-PANA(7262)Telephone SystemViewing the Caller List• If there is no name information for a caller, the display will only show the phonenumber.• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.What “√” means“√” indicates you have already viewed this callinginformation or answered the call. If the same caller callsagain, the call entry with the “√” will be replaced with thenew call entry.If a caller calls more than onceThe number of times the same caller called is displayed(“×2” to “×9”). The date and time of the most recent callwill be recorded. After viewing a caller’s information, “×2”to “×9” will be replaced with “√”.Calling Back from the Caller List• In some cases, you may have to edit the number before dialing (p. 36).(Ex. You may have to delete “1” and the area code.)• If a phone number is not displayed in the caller information, you cannot call thatcaller back from the Caller List.1 Press the soft key ( ), [d], or [B] toenter the Caller List.2 To search from the most recent call, press [d].To search from the oldest call, press [B].• The caller’s name, number and the time and dateof the call are displayed.3 Press [OFF] to exit the list.1 Press the soft key ( ), [d], or [B] to enter the Caller List.2 Scroll to the desired caller by pressing [d] or [B].3 Press [C] or [s].• The phone number is dialed.HandsetC I D Ex. 10 calls missed.Caller list10 missed callsdB=Scroll listSMITH,JACK1-555-333-44443:10P JUN.10ExampleSMITH,JACK1-555-333-44443:10P JUN.10 √TURNER,CINDY1-555-456-789011:20A JAN.12 ×3Ex. Called 3 times.HandsetC I D