Panasonic KX-TG5480 Operating Instructions Manual

Also see for KX-TG5480: Quick setup guide

Contents

Panasonic KX-TG5480 Operating Instructions Manual Manual pdf 68 page image

Listening to Messages68• If a call is received during playback, the unit rings and playback stops. To answerthe call, press the called line button. For playback, start again from the beginningafter hanging up.• If 65 or more new messages have been recorded, the unit will not announce thenumber of new messages during playback.Using the Handset (Remote Operation)When “ ” flashes and “New message” isdisplayed, new messages have been recorded. If thereare only old messages, “ ” is displayed but will notflash.To play back messagesTo play back messages from the function menuPress [MENU], then press the soft key ( ) at “Message play”,instead of pressing the soft key ( ) then the soft key ( ).1 Press the soft key ( ) .• When there are new messages, “ ”flashes. If there are only old messages“ ” is displayed but will not flash.2 Press the soft key ( ) .• The unit beeps, then announces the number ofnew messages. Only new messages are playedback.• To switch from the speaker to the receiver, press[C]. To switch back to the speaker, press [s].• When there are no new messages, the unitannounces “No new messages. All messageplayback”, then plays back all messages.• When there are no messages, the unitannounces “No messages”.• To play all messages, press [5].• If you do not press any button, the voice menuwill start (p. 69).3 To end remote operation, press [OFF].Handset7 missed callsNew messageLINE1 LINE2 SEARCHEx. New messages exist.SEARCHSEARCHSEARCHPL AYPL AY7 missed callsNew messageC I D PLAY CEx. New messages exist.PL AYRemote operation;4=Erase msgREPEAT S K I PSELECTSEARCH PL AY