Intercom FeaturesFor assistance, please visit http://www.panasonic.com/consumersupport 37IntercomIntercom calls can be made between thehandset and the base unit, and between 2handsets.Call the desired unit by selecting theextension number (! to )), shown in theupper right of each handset’s display. Thebase unit’s extension number is 0.L The base unit will display the paging orpaged handset’s extension number(H1 to H8).Note:L If you have difficulty hearing the otherparty while using the speaker, decreasethe speaker volume.L If you receive a phone call while talkingon the intercom, you will hear 2 tones(page 53, 55). To answer the call with thehandset, press {OFF}, then press {C}or {s}. To answer the call with the baseunit, press {SP-PHONE} 2 times.L You cannot change the ringer tone forintercom calls.From the handset to the base unit1 Handset:Press {INTERCOM}, then press {0}.L The base unit will beep for 1 minute.L To stop paging, press {OFF}.2 Base unit:Press {SP-PHONE} or {INTERCOM}to answer the page.3 Handset:When finished talking, press {OFF}.Note:L During an intercom call, the handsetuser can switch to the speaker bypressing {s}. To switch back to thereceiver, press {C}.From the base unit to a handset1 Base unit:Press {INTERCOM}.2 To page a specified handset, press itsextension number ({1} to {8}).ORTo page all handsets, press {0}.L The handset(s) will beep for 1 minute.L To stop paging, press {SP-PHONE}or {INTERCOM}.3 Handset:Press {C}, {s}, or {INTERCOM} toanswer the page.4 Base unit:When the paged party answers, speakinto the MIC.5 Base unit:When finished talking, press {SP-PHONE} or {INTERCOM}.Note:L You can locate a misplaced handset bypaging it. (Handset locator)L If you page all handsets, only thehandset user who answers first can talkwith the base unit.From one handset to another handsetExample: When handset 1 calls handset 2.1 Handset 1:Press {INTERCOM}, then press thehandset’s extension number {2}(desired handset number).L The paged handset will beep for 1minute.L To stop paging, press {OFF}.2 Handset 2:Press {C}, {s}, or {INTERCOM} toanswer.3 When finished talking, press {OFF}.