Panasonic KX-TG5583PK Operating Instructions Manual

Also see for KX-TG5583: Operating instructions Operating instructions

Contents

Programmable SettingsFor assistance, please visit http://www.panasonic.com/consumersupport 53Handset key toneYou can select whether or not key tonesare heard when keys are pressed.Includes confirmation tones and errortones.1 Press {MENU} (middle soft key).2 Scroll to N, then press {SELECT}.3 Scroll to “Key tone”, then press{SELECT}.4 Press {V} or {^} repeatedly to select“On” or “Off”.5 Press {SAVE}, then press {OFF}.Auto talkWhen this feature is turned on, you cananswer a call by lifting the handset off thebase unit or charger without pressing{C}.1 Press {MENU} (middle soft key).2 Scroll to N, then press {SELECT}.3 Scroll to “Auto talk”, then press{SELECT}.4 Press {V} or {^} repeatedly to select“On” or “Off”.5 Press {SAVE}, then press {OFF}.Note:L If you subscribe to Caller ID service andwant to view the caller’s information onthe handset display after lifting up thehandset to answer a call, turn off thisfeature.Handset interrupt toneThis tone lets you know when you receivea call while you are on an intercom call ormonitoring a room.“2”: The tone will sound 2 times.“On”: The tone will sound for as long as theline rings.“Off”: Turns this feature off.1 Press {MENU} (middle soft key).2 Scroll to N, then press {SELECT}.3 Scroll to “Interrupt tone”, thenpress {SELECT}.4 Press {V} or {^} repeatedly to selectthe desired setting.5 Press {SAVE}, then press {OFF}.Handset display languageYou can select either “English” or“Español” as the display language.1 Press {MENU} (middle soft key).2 Scroll to N, then press {SELECT}.3 Scroll to “Change language”, thenpress {SELECT}.4 Press {V} or {^} repeatedly to selectthe desired language.5 Press {SAVE} or {GUARDAR}, thenpress {OFF}.Note:L If you select a language you cannotread, press {MENU} {#} {1} {1} {0}{1} {SAVE} to change the displaylanguage to English.Flash timeThe flash time depends on your telephoneexchange or host PBX.You can select: “90ms” (milliseconds),“100ms”, “110ms”, “250ms”, “300ms”,“400ms”, “600ms”, or “700ms”.1 Press {MENU} (middle soft key).2 Scroll to N, then press {SELECT}.3 Scroll to “Set tel line”, then press{SELECT}.